In case the shoulder belt buckle is
found touching at the baby or the
carrying person, release the carrier
at a safe place first and adjust the
ladder (that used to adjust the
shoulder belt length) which is located
at the opposite side of the shoulder
belt buckle.
When the shoulder belt buckle
is too high and touching at the
shoulder
Pull on the shoulder belt end such
that the shoulder belt buckle
comes down to a proper position.
Use the ladder to adjust the
shoulder belt length.
When the shoulder belt buckle
is too low and touching at the
D-ring
(It may become difficult to unseat
the baby if the shoulder belt
buckle is too close to the D-ring.)
Release the shoulder belt end,
lift the shoulder belt buckle to a
proper position and use the ladder
to adjust the shoulder belt length.
Unseating from face-in cuddling position
1
Sit down on a safe place and
release the supporting belt buckle.
WARNING
Make sure to sit down first before unseating the
baby to prevent the baby from accidentally
falling down during the process.
2
Hold the baby with one hand and
release the shoulder belt buckle
with another.
WARNING
Make sure to hold the baby with one hand when
releasing the shoulder belt buckle to prevent
the baby from accidentally falling off during the
process.
Lengthen the shoulder belt until the
shoulder belt buckle stops at the D-
ring.
(You may unseat the baby at this stage
if there is enough space to do so.)
D-ring
3
Lower the D-ring cover.
Lift the D-ring cap, and then
Use another hand to pass the
shoulder belt buckle through
the D-ring.
1
2
3
D-ring
D-ring
cover
Cap
4
Unseat the baby in a safe place.
Please contact local distributor for enquiries.
6
Summary of Contents for Ninna Nanna K-58
Page 8: ......
