USER MANUAL FOR RA-5300 III3
ENU STATUS : 1-0-1
Copyright - refer to title page
Page 51
Freq. Band Config]: select frequency band in setting columns of RF information window for Freq. Band
Config, then press [Enter] or [Config] button to finish the configuration operation.
For MU, users should set frequency band according to the band of dupexer Unit insert into the slot of
MU. For RU, the band configuration has been set OK before factory, no need to set on site.
Completion of the band configuration required to reset the MCU.
Wrong set of Freq. Band Config will not cause any inpect to device operation.
This Freq. Band Config information will be sent to OMC.
Trigger Control
In Trigger Control options, user can reset PA of each frequency band.
Figure 66: RU Trigger Control
