USER MANUAL FOR RA-5300 III3
ENU STATUS : 1-0-1
Copyright - refer to title page
Page 27
Step 2: take out the pylons screw, fix it on the clinching nut on top of the enclosure using adjuatable
wrench.
Figure 22: Pylons Screw
Step3: Hook the RU on to the top part of the bracket and then to the bottom, as shown in the following
figure. Then tighten four M8*25 screw with plain washer and spring washer on top and bottom of the
enclosure using 6# Allen wrech.
Figure 23: Hang the Enclosure on the Mounting Bracket
Pylons screw
