Comar Systems 001-1019, User Manual

Page: 22 / 32

CSB200-S
22
13 DATA CONNECTION
If an external display unit is to be used to show other AIS units within range (such as a chart plotter,
computer serial terminal or other display device) then connect the correct tails of the data interface
cable to the display device. Note that the software in the display device must be configured for AIS
operation.
13.1 Connection to a computer
The CSB200-S may be connected to a computer using the USB cable supplied.
13.2 NMEA 0183 Connection
The data cable assembly to bare tails (provided) mates with the 9-pin D-type female connector
mounted at the rear of the CSB200-S. This cable is to be used for a NMEA 0183 connection
(IEC 61162-1).
13.2.1 Pin Identifications (by function)
The following table shows the pin identifications of the 9-way D-sub connector on the rear of the unit.
This connector handles the NMEA 0183 inputs and outputs:
3
With IEC 60757 colour abbreviations
Pin: Cable core colour
3
Function: Description:
1 Brown, BR No connection -
2 Red, RD NMEA Output Port 1 (+) Default 38400 Baud
4 Yellow, YE NMEA Output Port 2 (+) Default 4800 Baud
5 Green, GN NMEA Output Ports 1 & 2 (–) NMEA Outputs Common (–)
6 Blue, BU AIS Transmission OFF Connect via external switch to pin 5
3 Orange, OG NMEA Input Port 2 (+)
Default 4800 Baud
7 Violet, VT NMEA Input Port 2 (–)
8 Grey, GY NMEA Input Port 1 (+)
Default 38400 Baud
9 Black, BK NMEA Input Port 1 (–)
1
5
6 9
9-Way D-Sub
Female Connection