ComAp InteliVision 13Touch, Global Manual

Page: 16 / 28

InteliVision 13Touch Global Guide
16
5 InteliVision 13Touch connection
possibilities
5.1 InteliVision 13Touch connection to a Single gen-set 16
5.2 InteliVision 13Touch connection to a Multiple gen-set 18
See chapter related products for more information about compatible ComAp controllers.
6
back to Table of contents
5.1 InteliVision 13Touch connection to a Single gen-
set
5.1.1 Ethernet (direct) connection
Many different kinds of Ethernet topologies exist. A basic point to point Ethernet connection can be made by a
direct or cross Ethernet cable. In addition, it is also possible to monitor more than one controller in a site through
a switch (TCP/IP protocol-based network). Another possibility is establishing a connection through the internet
network, but for this a public IP address is necessary (or AirGate ComAp technology without a need for a public
IP address). The physical configuration of such a network can be a small Ethernet LAN or also through the
internet.
Image 5.1 Point to point Ethernet connection
IV13T settings Controller settings
2 x 10/100/1000 TX ports.
IP settings necessary.
See the Controller manual for the specific help.
Table 5.1 Communication settings for the IV13T and controller