ComAp ID-Lite, Global Manual

Page: 165 / 225

ID-FLX Lite & Telecom Global Guide
165
Setpoint group Date/Time Related FW 2.5.0
Range [units] [DD:MM:YYYY]
Default value -
Step -
Comm object 24553 Related applications
Description
Actual date.
Date
6
back to List of setpoints
Setpoint group Date/Time Related FW 2.5.0
Range [units] NoFunc, AutoRun, AutoRegCMP, AutoBatt, AutoStop [-]
Default value No Func -
Step -
Comm object 11660 Related applications
Description
No Func
Operates just corresponding T
IMER
1 (
PAGE
216) according the T
IMER
1 (
PAGE
216)
setting, see Timer1repeat (page 166) , Timer1 ON time (page 166) , Timer1Duration
(page 166) . Function operates in all OFF-MAN-AUT modes. Default state.
AutoRun
Engine automatically starts and stops in AUT mode (similar to R
EM START
/
STOP
(
PAGE
186) , the same record in the history) according the T
IMER
1 (
PAGE
216) setting.
AutoRegCMP
Start and stop engine in AUT mode according to the S
PEED
S
WITCH
(
PAGE
217) - see Reg
CMP Input (page 130) . The comparator function (output) works opposite when Reg
CMP On (page 130) < Reg CMP Off. The Timer1repeat (page 166) , Timer1 ON time
(page 166) , Timer1Duration (page 166) settings are not important in this case.
AutoBatt
Engine starts when actual Battery voltage < Batt undervolt (page 142) + Batt volt del
(page 142) and stays running for Timer1Duration (page 166) . Function operates in AUT
mode.
AutoStop
Engine is switched from AUT to MAN and stopped or stopped from MAN mode (like by
STOP button) when engine runs longer then Timer1Duration (page 166) on actual RPM
less or equal Idle speed (page 115) + 5 % (fix limit). Function is not active during engine
start.
Timer1Function
6
back to List of setpoints