11
MACHINE PREPARATION
5.
CONNECTION OF THE BATTERY CHARGER
The connector is placed in the left lower part of the operator seat. The upper part (1),
which is connected to the batteries, is the one which has to be inserted to the
connector (2) fixed to the cables of the battery
charger.
The coupling connector of the
battery charger is delivered in the bag where this instruction booklet is found and must
be assembled on the battery charger cables following the suitable instructions (see
instruction booklet of the battery
charger
).
6.
RECHARGE OF THE BATTERIES
In order not to cause the risk of permanent damage to the batteries, one should at all
costs avoid their complete discharge and effect recharging within a few minutes after
that the signal lamp of discharged batteries begins to blink.
NOTE
: Never leave the batteries completely discharged, even if the machine is not
being used.
When recharging the batteries, keep the base support of the seat lifted.
Every 20 recharging operations, check the level of the electrolyte and, if necessary, top
up with distilled water.
Exhalation gas and corrosives liquids hazard.
Fire hazard: do not bring flammes.
7.
LEVEL INDICATOR FOR THE CHARGE OF THE BATTERIES
The batteries’ indicator is digital with 4 fixed positions and a blinking one. The numbers
which appear on the display show the approximate charge level.
4
= maximum charge,
3
= charge 3/4,
2
= charge 2/4,
1
= charge 1/4,
0
= (blinking)
battery is due to charge.
Some seconds after that “0” blinks, the brushes motor
automatically switches off. Anyway, the machine can finish to dry
before recharging the batteries.
2
1
