Page 9 of 28
INSTRUCTION MANUAL
LI-3P-1x Series
3-PHASE LINE IMPEDANCE STABILIZATION NETWORKS (LISNs)
SECTI ON 3 -
PRODUCT INFORMATION
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV083017
•
POWER CORD PROTECTION
-
Place power supply cords so that they are
not likely to be walked on or pinched by items placed on them or against
them.
•
CLEANING
–
Clean the instrument outside surfaces of the device with a
soft, lint-free cloth. If necessary, a mild detergent may be used.
•
NON-USE PERIODS
-
Unplug the power cords of the instrument when it
will be left unused for a long period of time.
•
OBJECT AND LIQUID ENTRY
-
Take care that objects do not fall into the
instruments and that liquids are not spilled into the enclosure through
openings.
•
DEFECTS AND ABNORMAL STRESS
-
Whenever it is likely that the normal
operation has been impaired, make the equipment inoperable and
secure it against further operation.
•
SITTING OR CLIMBING
-
Do not sit or climb upon the instrument or use it
as a step or ladder.
•
ENVIRONMENTAL CONDITIONS
-
This equipment is designed for indoor
use. Ambient temperature range during operation should be between 5°
C to 40° C.
•
STORAGE AND PACKAGING
-
The device should only be stored at a
temperature between –25 and +70 °C. During extended periods of
storage, protect the device from dust accumulation. The original
packaging should be used if the device is transported or shipped again. If
the original packaging is no longer available, the device should be
packed carefully to prevent mechanical damage.
