Columbus V - 990 Mark II, User Manual, Page: 19 / 40

Point Of
Interest
Adding a voice mark point
You can add a voice mark to your traveling track at any time*. This is the simplest and most interesting
way to take notes along your journey. After that a symbol can be generated on the map to facilitate
your recollection in the future.
To view a voice label on a map, refer to P.29.
* Audio recording is only supported on a high-speed memory card with the capacity of more than 512M. There's no
length limit of a voice mark. The only limit is the card capacity.
1
Voice
-tag
19
Logging Your Journey
Adding a Point of Interset
Adding a
Point of Interest
(1) Begin audio recording. Press and hold the Audio
REC button. Begin recording after the Run/Power
Status LED turns to red and you hear a "beep"
sound.
(2) Finish recording. Release the Audio REC button.
When you hear two "beep" sounds and the
Run/Power Status LED turns to green, the
recording is finished.
For better audio recording,
stay as near the microphone
as possible.
press and hold
turn red
beep
Finish Recording
release
turn green
beep beep