Columbus V - 990 Mark II, User Manual, Page: 16 / 40

Introduction and changeover of operating modes
V-990 has two normal operating modes. You may switch between these modes using the
Power/Function button
as follows:
16
Power Off
Getting Started
Start to Use
Start to Use
1
Long press the
for 3 seconds
,
two short
beeps and starts up.
Short press the
,
a short beep.
Short press the
,
a short beep.
Long press the
for 3 seconds
,
a long
beep and shuts down.
Motion
Detecting
Mode
Normal
Mode
Motion Detecting Mode
●
In this mode, V-990 will automatically detect
the current state of motion, stop motion or
when the satellite signal lost more than 5
minutes, V-990 will automatically enter
standby mode.
●
Once the V-990 detect motion, the device
automatically wakes up and continues to
track.
●
In this mode, simply press the
"Power/Function button" to enter "Normal
Mode."
Normal mode
●
In this mode, the motion detecting function
is off, only track.
● In this mode, simply press the "Power /
Function button" to enter "Motion Detecting
Mode".