Columbus V - 990 Mark II, User Manual, Page: 12 / 40

This device is built in with a 1000mAh Li-polymer battery, which allows for hundreds of charge-discharge
cycles. Proper charging and discharging can effectively maximize the service life of the battery.
●
For vehicular applications, use the car charger included in the accessories in addition to the auto
ON/OFF adaptor cable.
●
Normally, the charging can be finished in about 3.5 hours. When the Charge LED turns from red to
green, it means that the battery has been fully charged. After charging is finished, do not leave the
charger at the power-on state for a long time.
●
If you will not use the device for an extended period, you should fully charge the battery before
storing the device.
Notes on battery duration
The battery duration is dependent on your selected operating mode. The battery duration at different
operating modes is as follows*:
●
Motion Detecting Mode: Approx. 7 days (Working 4 hours per day)
●
Normal Mode: 36 - 40 hours
●
Spy Mode: Up to 35 days
* Testing data of the receiver in open spaces.
Duration is subject to the environment of use,
operating mode, positioning status, weather,
and data format.
S U P E R
P O W E R
12
Getting Started
How to Charge the Battery
How to Charge the Battery