Columbus McKinnon Entertainment-Lodestar B, Operating, Maintenance & Parts Manual

Page: 5 / 85

SPECIFICATIONS
The Lodestar Electric Chain Hoist is a highly versatile materials
handling device that can be used to lift loads that are within
its rated capacity. The mechanical features of these hoists
include an alloy liftwheel, load-limiter, hardened steel chain
guides, hardened steel load chain, hardened steel gear train,
life-time lubrication, forged steel hooks, and lightweight alu-
minum frame. The electrical features included hoist-duty
motor, rugged hoist brake, magnetic reversing contactor and
voltage conversion board (dual voltage units).
Follow all instructions and warnings for
inspecting, maintaining and operating this hoist
.
The use of any hoist presents some risk of personal injury or
property damage. That risk is greatly increased if proper
instructions and warnings are not followed. Before using this
hoist, each operator should become thoroughly familiar with
all warnings, instructions, and recommendations in this manual.
Retain this manual for future reference and use.
Forward this manual to the hoist operator.
Failure to operate the equipment as directed in the manual
may cause injury.
Before putting hoist into service, fill in the information below.
Refer to the hoist identification plate.
Model Number
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
Serial Number
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
Purchase Date
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
Voltage
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
Rated Load
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
Table 1. Specifications
Entertainment-Lodestar Electric Chain Hoists
Single Speed 230/460-3-60 or 220/380-3-50 or 220/415-3-50
Model
Maximum
Capacity
Lifting Speed
50 Hz units
Lifting Speed
60 Hz units
Motor H.P.
Shortest Distance
Between Hooks
Net Weight
Tonnes kg ft/min m/min ft/min m/min HP KW Inches mm lbs kg
B
1/4 250
13.3
4.06
16
4.88 1/4
0.186
16.9
429.3 63.0 28.6
C 1/4 250 26.7 8.13 32 9.75 1/4 0.186 16.9 429.3 71.0 32.2
F 1/2 500 13.3 4.06 16 4.88 1/2 0.373 16.9 429.3 70.0 31.8
J 1/2 500 26.7 8.13 32 9.75 1 0.746 18.1 459.7 122.6 55.6
L
1 1000
13.3
4.06 16
4.88 1
0.746
18.1
459.7 124.6 56.5
LL 1 1000 26.7 8.13 32 9.75 2 1.49 18.1 459.7 128.6 58.3
R 2 2000 6.7 2.03
8
2.44 1 0.746 25.8 655.3 147.3 66.8
RR 2 2000 13.3 4.06 16 4.88 2 1.49 25.8 655.3 147.3 66.8
2
ACCESSORIES
Figure 1. Hook Suspensions Figure 2. Upper or Lower Latchlok
®
Hook
LATCHLOK® HOOKS
CM’s Latchlok hooks (see Figure 2) are available to replace
the standard upper and lower hooks used on the Lodestar
Electric Hoists.
HOOK SUSPENSIONS
Swivel and rigid type hook suspensions (see Figure 1) are
available for all Lodestar Electric Hoists. However, swivel
type hook suspensions are normally recommended for
most applications.