background image

6

11. Grass catcher components and the discharge 

cover are subject to wear and damage which could 
expose moving parts or allow objects to be thrown.
For safety protection, frequently check components 
and replace immediately with original equipment 
manufacturer’s (O.E.M.) parts only, listed in this 
manual. “Use of parts which do not meet the origi-
nal equipment specifications may lead to improper 
performance and compromise safety!”

12. Do not change the engine governor settings or 

over-speed the engine. The governor controls the 
maximum safe operating speed of the engine. 

13. Maintain or replace safety and instruction labels, as 

necessary. 

14. Observe proper disposal laws and regulations for 

gas, oil, etc. to protect the environment. 

WARNING: 

 YOUR RESPONSIBILITY

 Restrict the use of this power machine to persons who read,

understand and follow the warnings and instructions in this manual and on the machine.

Safety Labels found on your unit

SECTION 2:  ATTACHMENTS & ACCESSORIES

The following attachments and accessories are compatible for your Garden Tractor. See the retailer from which you 
purchased your tractor, an Authorized Service Dealer. 

† 

190-824 is required for use of this attachment. 

190-608 cannot be used in its place.

MODEL

DESCRIPTION

OEM-190-604

Yard-Mate™ Storage Container/Toolbox (mounts on rear of tractor)

OEM-190-607

Deluxe Tractor Sunshade

OEM-190-603

Bumper Kit

OEM-190-608

Sleeve Hitch, Manual Lift

OEM-190-842

Triple Bagger Grass Collector 

OEM-190-833

46-inch Front Dozer Blade

OEM-190-823

42-inch Two-stage Snow Thrower

OEM-190-824

Sleeve Hitch with Electric Lift

OEM-190-825

30-inch Hydraulic Tiller†

OEM-190-841

Mulch Kit

490-900-0025

Deck Wash Kit

S30011

MAX 20%

S30544

Summary of Contents for Hydrostatic Garden Tractor




























Reviews: