SPA PREPARATION
PREPARE THE SPA FOR FILLING
a. Clean all debris, dirt or other materials out of the spa.
b. Although the spa shell has been polished at the factory, you may want to treat it with a specially
formulated spa cleaner and wax available from your dealer prior to filling it for the first time.
c. Check all plumbing connections for leaks, and repair as needed. ALL DISCONNECTED AND/OR
LOOSE PUMP OR CONTROL PACK UNIONS SHOULD BE HAND TIGHTENED ONLY.
d. Make sure the all suction fitting cover(s) are in place in the foot well of your spa. This unit is not to be
installed or used without the suction fitting covers approved to prevent hair and body entrapment. Virginia
Graeme Baker Act (VGB) approved fitting covers have been installed at the factory in your spa.
Illustrations are for reference only. Your instillation may differ.
Consult a licensed electrician for your install.
IMPORTANT! A minimum of 6 jets, per pump, must be in the open position at all times.
Damage resulting from failure to do so will not be covered under your warranty.