Coltri Sub MCH 13/ET, Instruction Manual

Page: 56 / 92

56
Check the sealing O-Rings and replace them if they are damaged.
Leave the cartridge in the filter when the compressor is not in use.
Maintain a pressure of 40-70 bar inside the filter to prevent outside dampness from getting in.
MODEL
N° OF 10 LITRE CYLINDERS TO
BE REFILLED
VOLUME OF
FILTERED AIR
DURATION OF
THE FILTER
200 bar 300 bar cu.m. hours
MCH 13/ET 322 214 644 50
MCH 16/ET 322 214 644 40
MCH 26/ET 322 322 214 214 644 644 50 50
MCH 32/ET 322 322 214 214 644 644 40 40
Table 4
To replace the active carbon filter, proceed as follows:
- unscrew the external cap using a lever between
the screws “A” (Fig. 82);
- remove the external cap and the internal cap
(Fig. 83);
83
82
Maintenance