Colormetrics V1500, User Manual

Page: 5 / 68

5
www.colormetrics.info Color metrics V1500
4 | 69
CE Notice
This device complies with the requirements of the CE directive.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
WEEE Notice
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste
electrical and electronic equipment (WEEE). The Directive determines the framework for the
return and recycling of used appliances as applicable throughout the European Union. This
label is applied to various products to indicate that the product is not to be thrown away, but
rather reclaimed upon end of life per this Directive.
1. Packing List 6
1-1 Standard Accessories 6
1-2 Optional Accessories 6
2. System View 7
2-1 Rear View 7
2-2 Side View 7
2-3 Front View 7
2-4 Back View 8
2-5 Specification 9
2-6 Internal Layout 10
3. Pin Definition 11
4. System Assembly & Disassembly 17
4-1 HDD 17
4-2 Memory 18
4-3 MSR 19
4-4 VFD 20
4-5 The 2nd Display 21
4-6 WI-FI 22
5. Device Driver Installation 23
5-1 Resistive Type Touch Panel & P-CAP 23
5-2 MagStripe Card Reader Configuration Utility 29
5-3 RFID 41
5-4 Configuration Utility of i-Button Reader 47
5-5 VFD 52
6. BIOS/Utility Setup 59
6-1 Advanced 59
6-2 Security 64
6-3 Power 65
6-4 Boot 66
6-5 Exit 67
7. LCD Surface Cleaning 68