29
www.colormetrics.info
Colormetrics P1300
31
3. To execute “VFDset.exe” for setting up communication between software and VFD module.
Please then follow the steps as shown in the above figure, the baud rate will show on states page
of VFD module (Note: You may check it when power on VFD module), then click “Open COM”
button.
4. “Get Setting from VFD” button to get all the settings from Clientron and it’ll refresh the
“VFDset.exe” software.
5. Select “Character Type”/ “Command Mode”/ “Baud Rate Select”/ “pass thru Mode”.
1
2
3
