background image

Warranty

ColorMaker Inc.

 hereby warrants, to the original purchaser, 

ColorMaker Inc.

 products to be free of manufacturing defects in 

materials and workmanship for a period of  (90 days) from the 
date of purchase. This warranty shall be valid only if product is 
purchased within the United States of America. It is the owners 
responsibility to establish the date and place of purchase by 
accepting evidence, at the time service is sought.

For warranty service, send the product to the 

ColorMaker Inc.

 

factory. All shipping charges must be prepaid. Equipment must be 
sent in its original package and to include all control devices.

Warrant is void if serial number has been altered or removed, seals 
have been voided, if the product is modifi ed in any manner which 

ColorMaker Inc.

 concludes, after inspection, affects the reliability of 

the product; if the product has been repaired or services by anyone 
other than 

ColorMaker Inc.

 unless prior written authorization was 

issued to purchaser.

ColorMaker Inc.

 reserves the right to make any changes in the 

designs and/or improvements upon its products without any 
obligation to include these changes in any products theretofore 
manufacture.

Factory location:
ColorMaker Inc.
980 Sunshine Lane Suite T
Altamonte Florida 32714
(407) 862-3363

ColorMaker.net

ColorMaker™ is a Trade Mark 

for ColorMaker Inc.

Summary of Contents for Cyclone360












Reviews: