User Manual
www.colorlight-led.com Version: V1.0 2015/11/26
5.2.3 Receiver card parameters setting
Click “Configure Select One...” to enter LED setting interface by using password 168.
Fig.5-6
Need to debug of common parameters
：
Serial clock
：
Control the serial clock frequency of the driver chip on the display
pane. In general, the value set up to 17.9MHz if the LED display is full color.
Gray Level
：
Support arbitrary adjustment from 0~65536 level gray. Indoor full
color LED display adopt 4096 level gray
Scan Method
：
The method of high refresh frequency 2 means that scan gray
firstly, the refresh rate is 8 times compared with normal method, which can
satisfy the customs high refresh requirement.
Gamma value
：
Gamma value is a key parameter for the LED display; it will affect
the display effect. Gamma value set up from 2.2 to 2.8 in generally.
Blanking value
：
We can appropriate to increase the blanking value when the
LED display screen appears trailing.
5.2.4 Connection Parameters (Look From Front)
