User Manual
www.colorlight-led.com Version: V1.0 2015/11/26
V.
Parameter Configuration
First of all, please make sure the software is in
Classic Mode
before setting.
Click the “Setting” > “Software Setting” to enter the Software Management window
(As shown in Fig.5-1), change the mode by using password: 168.
Fig.5-1
5.1 Hardware Connection Check
Please make sure that the hardware connection correct and software in Classic
Mode before setting.
5.1.1 Detect Sender Cards
Run software, c
lick the “Control” > “Screen Management” to enter the Screen
Management window, the Sender Mode select
“By Sender Card”, Click “Detect Sender
Cards”, the sender cards information will show in the interface, (as shown in Fig.5-2 )
Please check the hardware connection if cannot detect sender cards.
