Page | 45
TXF
The
CALIBRATION
screen with
TEST PRINT
option appears, as shown below:
Fig 57: Issuing the Test Printing
Step 4:
Press the
ENTER
button from the Control Panel of the print engine for test printing (Refer to Fig
58).
Step 5:
After finishing the test printing, press the Down arrow button to select the
SETTING
option, as
shown below:
Fig 58: Selecting the SETTING Option
Step 6:
Press the Right arrow button to confirm the selection.
Step 7:
Press the Left or Right arrow button to position the cursor and then, press the right arrow to enter
the correction value, as shown below:
Fig 59: Entering the Correction Value
Now, the
Feed Calibration
value gets corrected.
