Page | 41
TXF
Step 13:
After completing the cleaning process, press the ENTER key and close the right cover when the
following screen appears:
Fig 49: Closing the Right Cover
To close the right cover, first attach it
and fix the cover in the printer’s hook as shown in 1. After th
is,
carefully push the cover in the direction 2 and press to fix it, as shown below:
Fig 50: Closing the Right Cover
Step 14:
Start the ink filling process by attaching the funnel and pouring ink in it.
Step 15:
After filling the ink, press the ENTER button.
Step 16:
After this, the following screen appears, as shown below:
Fig 51: Instructing to Drain the Waste Bottle
Remove the Drain Bottle and empty it.
Step 17:
Again, attach the Drain Bottle and press the ENTER key to move the next step.
Now, the ink filling process gets started and the time required to fill the ink appears, as show below:
When the ink filling process gets completed, the following screen appears, as shown below:
Fig 52: Ink Filling Process Gets Completed
Make sure that the Waste
Bottle is not overflowed
