Page
25
of
40
FABJET GRAND
Step 5
: After making the desired changes,
click
on the
OK
button to apply the settings, as shown below:
Fig 40: Displaying the Edit Job Form Window
Similarly, you can click on any other option and its related options get enabled in the right pane of the
Edit Job form. In the above figure, some options are shown which are available only on the selected
ripping software.
Ripping and Printing
Ripping is an independent process which converts a raw image file into the machine-readable format
and get the file ready for printing. The Rip software supports the tiff, jpeg, eps, psd, bmp file formats.
After ripping the image file, the output file will be in
“.prt”
or
“.prn”
file format. Thus, you should first
rip the image file before printing and then issue the Print command. While ripping, the color profiles
are used to automatically perform the color corrections in the image. There are different combination
of print modes and resources, as shown through the table:
Modes
Print Passes
Print DPI
Mode 1
2
540X720
Mode 2
3
540X1080
Mode 3
4
540X1440
Mode 4
6
540X1080
Mode 5
8
540X1440
