Figure B
Ground Lug
PWR
DMD_IN
USB Port
Figure C
WPC
Mounting
Holes
WPC
Mounting
Holes
WPC Games
With Lamp Board
Mounting Holes
WPC Games
With Lamp Board
Mounting Holes
1/4" Spacer (included
with ColorDMD)
5/8" black Spacer
Washer
Lock Nut
ColorDMD Bracket
WARNING - ELECTRIC SHOCK
To protect against electrical shock,
ground wire from the backbox must
be connected to this metal bracket.
Install one 1/4" Spacer on each of the four threaded studs and
then position the ColorDMD face down (in the orientation shown
in Fig. B) on the speaker panel and align the four WPC
mounting holes (see Fig. C).
Remove the protective film from the front side of the new
ColorDMD display.
Use the original DMD mounting hardware from Step 3 to fasten the
ColorDMD display to the speaker panel. See Fig. B for correct stacking
order of the hardware. Ensure the ground cable lug from Step 7 is
sandwiched between metal bracket and one of the 5/8" black spacers.
5
6
7
STEP
STEP
STEP
!
WARNING
.
Electric Shock Hazard
- To protect against
accidental electric shock,
DO NOT
operate the game without
ensuring that the ColorDMD metal bracket is electrically grounded.
Locate the included green ColorDMD ground cable and connect one
end to the Ground Lug in the backbox (see Fig. B). Loop the other
end over the threaded stud nearest the Ground Lug (see Fig. E).
8
STEP
ALL RIGHTS RESERVED - US PATENT 8,773,452 B2 - COPYRIGHT 2016 - COLORDMD DISPLAYS LLC