Remark:
After switching on the appliance for the first time and following extended periods of non-use, the appliance
may smell for a short time.
A few minutes after switching the heater on, you may notice two dark stains on the bulb element. This is
normal and it will not affect the performance of the unit.
Attention: Do not look directly into the light for a long time.
The installation must be equipped with an all-pole disconnection mechanism with a break contact
distance of at least 3 mm.
5. Cleaning
Disconnect the appliance from the power supply system;
After the appliance has cooled down, the housing can be wiped dry;
Do not touch the bulb element with your fingers, since stains could build up from such a contact.
The reflector should be cleaned regularly by professionals.
Do not use any abrasive or caustic cleaning agents!
Never immerse the appliance in water! Danger to life!
6. Maintenance
Any maintenance or repairs including replacing the bulb element should only be carried out by a qualified
electrician.
7. Specifications
MODEL
CLHR-20WR
Switch
YES
Remote controller
YES
Voltage / Frequency
230V ~ 50 Hz
Power
2000
Insulation
Class I
Waterproof protection
IP65
8. Correct disposal of the product
The symbol
on the product means that at the end of its life, the appliance has not to be considered a
common waste. It is a special waste and has to be demolished in specific recovery and disposal area, as
prescribed by the EC Directive 2002/96/EC(WEEE). By disposing this product correctly, you can avoid negative
consequences for the environment and for the human health, due to the presence of potentially dangerous
substances in the product.
