background image

 

 

Operating your Blender  

 

Before first use 

 
Before using your blender for the first time, 
remove any packaging material and 
promotional labels. Ensure the appliance is 
switched off and the power cord is unplugged 
from the power outlet. Wash the lid, blender 
jug, mixing rod and blade assembly of the 
blender in warm soapy water, with a soft cloth. 
Rinse and dry thoroughly. Do not place parts 
in the dishwasher. The motor base can be 
wiped with a damp cloth to remove any dirt. 
Dry thoroughly.  

 

When first using the Blender, you may 
notice an odour coming from the motor. 
This is normal and will dissipate with use.  

 

All processing blades are extremely sharp. 
Avoid any contact with hands. 

 

Note        

 
Assembling and attaching the 
blender  

5. Select the required speed function by 

choosing either the Pulse operation by 
pressing down the PULSE switch, either the 
Continuous Operation, by lifting the 
POWER switch. Speed can be changed at 
any time during the blending process by 
adjusting the Variable Speed Regulator 
from the MINIMUM to the MAXIMUM. Press 
down the POWER switch or let the PULSE 
switch to stop blending.  

6. For ingredients that require short bursts of 

power, use the switch of the PULSE 
function. Press the PULSE switch down for 
short bursts until blending is complete.   

7. The ice crush requires the highest speed 

and is performed with the Pulse Operation 
switch.  

8. At the end of use, press down the POWER 

switch or let the PULSE switch and unplug 
the power cord from the power outlet.  

 

 

Important- To crush ice 

 

Place 1 cup of frozen ice cubes into the 
Blender jug. Replace lid and press the PULSE 
switch down. Once a snowy textured ice is 
achieved, let the switch in order to stop the ice 
crushing. This will take approximately 15 
seconds. 

 

During the blending process, ingredients may 
stick to the sides of the Blender jug. To push 
the food back onto the blades, press the 
POWER switch down and unplug the power 
cord from the power outlet. Remove the lid and 
use a plastic spatula to scrape down the sides 
of the jug. Replace the lid before 
recommencing blending.  
  
If any moisture of liquid appears on top of the 
motor base, press the POWER switch down 
and unplug the power cord from the power 
outlet. Remove the blender jug. Wipe the motor 
base immediately with paper toweling and 
check the blender jug is correctly assembled.  

 

1. Place the motor base on a flat, dry surface 

such as a bench top. Ensure that the motor 
is switched off and the power cord is 
unplugged from the power outlet.  

 

2. Turn the blender jug upright and insert on to 

the motor base.  

 

3. Add food or liquid into the blender jug. 

Place the blender lid firmly into position on 
the top of the blender jug.   

 

4.  Plug the power cord into a 230 / 240 V 

power outlet and either lift the Switch of 
Continuous Operation (POWER), or press 
down the Switch of Pulse Operation 
(PULSE). Always use one of the two 
switches and never both of them together. 

 

 

Note 

 

 
 
 
NEVER PLACE ANYTHING OTHER THAN FOODS AND LIQUIDS IN THE 
BLENDER WHILST THE MOTOR IS RUNNING. 

Summary of Contents for CLB-1800S














Reviews: