Setup/Operation 2-1
Setup/Operation
The first part of this chapter describes how to set up your
Ultimate Pace Clock. Setup is easy, but must be done
correctly to ensure proper operation. The second part of this
chapter gives you step-by-step instructions for programming
and running a training program.
To set up the Ultimate Pace Clock, follow these instructions.
1) Connect one end of the data cable to the data cable port on
the console and the other end to the data port on the side of the
LED or LR model portable pace clock.
2) Plug in the portable display to a power supply using the AC
power adapter or use the display’s internal, rechargeable
battery.
Note: We recommend you use the rechargeable battery
and not AC power when operating the display on the
deck of the pool. Use the AC power to charge the battery
overnight or if the pace clock is permanently mounted on
the wall.
3). If you are using the UPC console with your existing 3009
or 4009 scoreboards, simply use the adapter cable to connect
your UPC console to your scoreboard the same way you
connect your timer to your scoreboard.
4). Turn on your scoreboard or the portable display.
2
Setup
Summary of Contents for Ultimate Pace Clock
Page 1: ...Ultimate Pace Clock User Guide F819 Rev 0903...
Page 4: ...Table of Contents ii...
Page 8: ...Introduction 1 4...