Reference 4-3
need to start.
RESET
and
START/STOP
are both used exclusively during
the run mode of operation. The
RESET
key enables you to
restart a set from the beginning of the current rep or the current
set.
START/STOP
is used to either begin a pre-programmed
workout or to stop a workout in progress. Pressing the
START/STOP
again after stopping a workout in progress will
continue the workout from where it was stopped.
SELECT SCBD
is an important key if you are using more
than one portable display or one line of a 3009/4009 CTS
scoreboard. Press the
SELECT SCBD
key to choose the num-
ber of the display (1-10). Next press
RUN MODE
and the
Workout and Set number.
The
TIME OF DAY
key allows you to post the time of day on
your portable display or your 4009 scoreboard. The console
does not contain an internal clock so the time of day must be
re-entered every time you want to use it. Simply turn on the
display and press the
TIME OF DAY
key. Next, press the
C/E
key to clear the old time. Select the hour and press
ENTER
then select the minutes followed by
ENTER.
Press the
Time
of Day
again to display the new time on the scoreboard. To
display the time of day on a multi-line 4009 scoreboard you
must first select scoreboard number 1 by using the
SELECT
SCBD
key.
Press
ENTER
to return to either RUN or EDIT Mode.
RESET and
START/STOP
SELECT SCBD
TIME OF DAY
Figure 3 shows the layout of the keys
on the Ultimate Pace Clock console
Summary of Contents for Ultimate Pace Clock
Page 1: ...Ultimate Pace Clock User Guide F819 Rev 0903...
Page 4: ...Table of Contents ii...
Page 8: ...Introduction 1 4...
