Multiple Workout
Feature
Selecting the
Scoreboard or
Display Line
Starting a Second
Workout
Starting and Stopping
Multiple Workouts
Simultaneously
Edit One Workout
While Running Multiple
Workouts
The Ultimate Pace Clock console is designed to run up to ten
different workouts simultaneously. To utilize this feature the
UPC console must be connected to a series of 3009, 4009 or
portable scoreboards from Colorado Time Systems.
To run any programmed workout you must first select the
proper scoreboard. Use the
SELECT SCBD
key to indicate
which scoreboard will be running your workout. The score-
board number will appear on the LCD screen under Scbd in
the upper left hand corner. Use numbers 1-10. A “0” will be
displayed for scoreboard #10. Once you have selected your
scoreboard press
RUN WORKOUT
then select the appropri-
ate workout and set. Press
START/STOP
when you want to
begin the workout.
To begin a second workout on another scoreboard or another
line of your 4009 display, simply specify the new scoreboard
number using the
SELECT SCBD
key, press
RUN WORK-
OUT
, enter the workout and set number then press the
START/STOP
key.
The Ultimate Pace Clock console is equipped with a way to
start multiple workouts simultaneously. From Run Mode,
select each scoreboard and enter the appropriate workout num-
ber. Once all scoreboards are programmed, double-click the
START/STOP
button to initiate all the workouts simultane-
ously. Double-click the
START/STOP
button again to stop all
workouts.
The Ultimate Pace Clock console allows you to edit one work-
out without disrupting other workouts that are in progress. This
also applies to stopping and restarting one of many workouts
in progress. Press
EDIT MODE
and enter the workout and set
number. Make the necessary changes then press
RUN MODE
,
SELECT SCBD
and enter the scoreboard number. Next
reload the workout by selecting the workout and set number.
Press
START/STOP
to begin the workout.
If you want to stop one workout, press the
SELECT SCBD
then enter the appropriate scoreboard number. The UPC con-
sole should still be in
RUN MODE
. Next press
START/STOP.
Setup/Operation 2-6
Summary of Contents for Ultimate Pace Clock
Page 1: ...Ultimate Pace Clock User Guide F819 Rev 0903...
Page 4: ...Table of Contents ii...
Page 8: ...Introduction 1 4...
