Surface-mounting the housing
Note: Feed the cables through the mounting surface, plates, and housing at
the appropriate time depending on whether you are using the flying lead
and whether the cable is external or internal to the mounting surface.
o prepare the mounting surface perform the following.
tion
2.
position of the mounting holes.
its outline.
ack cable entry hole.
m
g holes.
the M4x20
To i
he following.
e hinge.
n-head
3.
e mounting slots on the inner plate with the
4.
rews
T
1. Position the outer plate on the mounting surface at the installa
location.
Trace the
3. If you are using the back cable entry, trace
4. Drill the outlined mounting holes.
Ceiling panel
Outer plate
Inner plate
M4x20
pan-headdouble-washer
M4x12
pan-head
double-washer
Top gasket
Anchors
M4x20
5. If necessary, cut out the outlined b
To ount the outer plate, perform the following.
1. Install the provided mounting anchors in the mountin
2. Mount the plates to the anchors in the mounting surface using
truss-head tapping screws.
nstall the housing perform t
1. Let the housing cover drop down and rest on th
2. Attach
the
housing
to the inner plate using the M4x12 pa
double-washer screws.
Line up the opening of th
M4x20 truss-head tapping screws holding the outer plate in place.
Rotate the housing clockwise to slide the mounting slots onto the sc
and secure the unit.
-7
-
