background image

 

General 

This color CCD video camera employs a 1/3 inch charge coupled device 
solid-state imaging device with 470/410 k or 310/270k picture elements, This 
unit is equipped with a newly developed DSP (Digital Signal Processor) for 
processing the video signal.    A micro-controller is also introduced to provide 
high color reproduction, sharp, stable picture and most of the function’s control; 
the special feature for this camera is it can accept IR illumination under 
minimal lighting condition. 

Features 

 

Accept IR illumination for completely dark surveillance, daytime color and auto 
swap to black-white picture at night. 

 

480 /380 lines of horizontal resolution and high quality picture by utilizing digital 
processing LSI’s 

 

Minimum illumination of 0.5 lux and signal-to-noise ratio of 48 dB is realized by 
employing a high sensitivity image sensor with micro lenses and low noise circuit 
design.  

 

High quality picture –A digital signal processor performs digital horizontal and 
vertical aperture enhancement to produce high-resolution picture. 

 

A newly developed intelligent wide range Auto Tracing White Balance (ATW)

 

that 

automatically adjusts the tone according to the color temperature of the light 
source illuminating the subject. 

 

Smart digital control Auto BLC, the combination of Histogram equalizer and 
Central windows weighting BLC functions ensure for use against any unusual 
lighting conditions. 

 

Advanced Auto Exposure System for both fix iris and auto iris lenses control the 
amount of light to ensure it is always optimized. 

 

Internal or 

Line-lock

 external sync 


 
 
 
 
 
 
 
 
 
 
 

 -2 

Summary of Contents for AC12VDC










Reviews: