10
SMARTHUB
2.4.1.
Signals Wiring
•
POWER ON:
System is ON. 1 when system is on 0 when no power feed.
•
LOW RSSI
: Weak signal strength. Signal is high when RSSI is weak; signal is low
when RSSI OK.
•
: Low battery in spindle transmitter. Signal is high when battery level is
low; signal is low when the spindle stops.
•
ZERO RPM
: Spindle is stopped – may be used to control machine door latch
(safety). 1 when power is on and spindle speed = 0.
•
HIGH/LOW RPM
: Speed either lower or higher than the preset limit. Signal is high
when high or low limit preset values are exceeded, Signal low when speed returns
to normal.
NOTE: Additional signals available upon customer request.
