6
6) Locate the vertical fine adjustment rod. It is a chrome-plated metal rod about six
inches long. Insert the smooth end into the chromed holder located on the side of the
yoke (See Fig. 6). You may have to loosen the large plastic locking knob in order to
insert the adjustment rod. Once the rod is inserted (with the end with the hole facing the
focusing assembly), tighten the large locking knob just enough to prevent the rod from
falling out. Locate the chrome post on the side of the telescope tube near the focusing
assembly. Remove the screw from the post. Insert it through the hole in the end of the
vertical fine adjustment rod and into the post. Turn the screw clockwise until it is tight.
(Do not over-tighten.)
(Fig. 6)
7) Remove the finder scope and finder scope bracket from the box. Remove the two
knurled thumbscrews from the telescope main tube (See Fig. 7). Position the finder
scope bracket onto the telescope tube so that the holes in the base of the bracket
line up with the exposed holes in the telescope tube. Replace the two thumbscrews
and tighten securely (See Fig. 8). Insert the finder scope into the bracket and tighten
the knurled thumbscrews to keep the finder scope securely in place.
(Fig. 7)
(Fig. 8)
