4
ASSEMBLY:
1) Carefully remove all parts from the cardboard cartons and lay them on a table,
floor or other flat surface in order to take an inventory of all the pieces. Keep your
box for storage or in case you ever need to ship your telescope.
2) Extend the legs, and lock each one at the desired height with the supplied tripod
adjustment knob (See Fig. 1).
(Fig. 1)
3) Connect all three tripod legs to the yoke with the supplied tripod leg attachment
bolts, washers, and nuts. Each leg has a hinged black metal flange located halfway
down its length. The legs should be positioned so that these hinged flanges are
facing the inside of the tripod. Note that there may be two black plastic spacers inside
the top sections of each leg (See Fig. 2).
(Fig. 2)
Azimuth Locking
Knob
