BravoWP
-16-
indicator will twinkle once (the photo shooting icon on LCD segment screen will twinkle once) and it
will return to the preview state.
b. Tripple Shot:
Press “M” key to enter the camera setup interface, press “>”or “<” key to move the cursor to “ ”,
select the menu “Three Photos Continuous Shooting”, and press “OK” key to confirm. Press “M” key
to exit the setup interface after setting. Press “Shutter” once at this time, and Bravo will continuously
shoot three photos.
c. Continuous shoot:
Press “M” key to enter the camera setup interface, press “>” key to move the cursor to “ ”, select
the menu “Continuous Shooting”, and press “OK” key to set the continuous shooting interval time
as 0s, 2s, 3s,5s,10s, 20s,30s. Press “M” key to exit the setup interface after setting the interval time.
Press “Shutter” at this time, and Bravo will start shooting one photo every 2s, 3s,5s,10s, 20s,30s, till
to press “Shutter” key again to stop.
d. Self Shot:
Press “M” key to enter the camera setup interface, press “>” key to move the cursor to “”, select the
menu “Self-timer”, and press “OK” key to set the delay time as 0s,5s or 10s. Press “M” key to exit the
setup interface after setting the delay time. Press “Shutter” once at this time, and Bravo will start the
timer and shoot a photo at the end of the delay time.
Note:
a. If the memory space gets full, the system will give the message 'Insufficient Memory' (viewing on TFT
display screen), and go back to the preview mode;
b. The setting of self-timer delay time is in effective once.
5. Voice recording
Press “M” key to enter the camera setup interface, select the menu “Shoot Mode”, press “OK” key