-12-
(2) Setting of camera parameter:
a. Single shot: The shooting mode is auto set in single shoot when starting up every time; To press
“Shutter” once can take one photo;
b. Tripple Shot: To press “Shutter” once can take three photos continuously;
c. Continuous shoot: Take one photo every 2s/3s/5s/10s/20s/30s, till to press key to stop or the card is
full, or the power is run out;
d. Self shot: Select the self-timer delay time (0s,5s or10s). Press “M” key to return to “Preview” state
after selecting; press “Shutter” once, the system will start the timer and the self-timer indicator
twinkles at the end of the delay time and it takes one photo. After finishing the self-timer for one
time, the system will auto recover the shooting mode to single shooting. If the 'Self-timer Delay Time”
has been set, but the machine is restarted without pressing “Shutter” key, the machine will auto set
the 'Self-timer Delay Time' at the state of 0s;
e. Image resolution: Select 3M, 5M or 8M;
(3) Setting of system parameter:
a. Beep: Turn on or turn off the key tone;
Note:
Voice of photo shooting and video recording cannot be turned off through this item. It only turns
off the key operation voice and there is no switch to turn off voice of photo shooting and video
recording in the machine system.
b. Self lamp: please turn it on or off before self timing; the default setting is “ON”.
c. Time display: Please set before using; the machine will auto record the shooting date and time when
shooting image and display on the bottom right corner of the file;
d. Loop coverage: The video/audio file will be auto saved in segment once every 15 minutes when setting “Loop
Coverage”; and if it is not set, the video/audio file will be auto saved in segment once every 30 minutes.
