Operating the Vehicle
8-2
①
Seat belt
2. Selecting light switch position.
■
Head Light Switch
Turn on the key switch and toggle the head light
switch to the (a) or ON position.
Toggle the head light switch to the (b) or OFF
position, to turn off the head light.
NOTE
：
Turning the head light switch to the “[a]” position
causes
the
following
lamps
to
light
simultaneously.
1. Tail lights (lamps at the rear portions of the
vehicle)
2. Lamp built in the coolant temperature
gauge.
3. Lamp built in the fuel gauge
4. Lamp built in the speedometer
■
Hazard Light Switch
[if equipped]
Press the hazard switch to the up position to
turn on the hazard lights. This will turn on the
blinking turn signals and audible alarm will
sound.
Note:
⚫
The hazard light switch will operate when
the key switch is in the “ON” or “OFF”
position. Keeping
the switch “ON” causes
the battery voltage to run down.
