Operation
1. Position the apparatus on a firm level surface
away from any heat sensitive material and
switch the unit ON.
2. If an incubation temperature of 37ºC is
required, press the pre-set temperature
switch to the top.
3. If another incubation temperature is
required, press the pre-set temperature
switch to the bottom (variable) and set the
temperature as follows:
SI60:
Turn the temperature control knob
clockwise to the desired setting. The load
indicator will remain lit until the desired
temperature setting is reached at which time
it will flash.
SI60D:
De-press and hold the press to set
switch and turn the temperature control
knob until the desired temperature appears
on the display. On releasing the switch, the
display will revert to the actual temperature
of the incubator. The load indicator will
remain lit until the desired temperature
setting is reached at which time it will flash.
Maintenance & Servicing
WARNING: Ensure the unit is
disconnected from the mains
electricity supply before attempting
maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST
be undertaken by suitably qualified
personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Service Department, quoting
both the model number and serial number:
Email: [email protected]
Tel: +44 (0)1785 810475
Only spare parts supplied or specified by
Cole-Parmer or its agents should be used. Fitting
of non-approved parts may affect the
performance of the safety features designed into
the instrument. If in any doubt, please contact
the Service Department of Cole-Parmer or the
point of sale.
For any other technical enquiries, please contact
the Technical Support Department:
Email: [email protected]
Tel: +44 (0)1785 810433.
Spares and Accessories
Description
Catalogue Number
Fuse 3.15AL
ESM3C15(S)
Thermal Fuse
ESI6020(S)
Potentiometer and Lead
T55
Transformer T45(S)
Heater HSI6005(S)
Base Plate
SI60/1
Shelf System
SI60/2
Gaunlet Front Panel
SI60/3
Gaunlet (per pair)
SI60/4
Tray SI60/5
Warranty
Cole-Parmer Ltd. warrants this equipment to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of
three (3)
years. In the event of a
justified claim, Cole-Parmer will replace any
defective component or replace the unit free of
charge. This warranty does NOT apply if damage
is caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by unauthorised
personnel.
Cole-Parmer Ltd,
Beacon Road,
Stone,
Staffordshire,
ST15 0SA,
United Kingdom
Email: [email protected]
Tel: +44 (0)1785 810475
Web: www.stuart-equipment.com
