Cole Parmer PolyStat CC1080, Manual

Page: 17 / 32

- 15 -
the volume difference between high and
low levels, the low liquid level sensor will
activate and shut down the pump.
In this case:
Refill the liquid
Depress the Reset button
The pump should restart
If it does not, repeat.
7. Draining
The CC1080 is drained at the nozzle.
Place a suitable vessel underneath nozzle.
NOTE: The liquid will run out in a slight arc.
Turn the plug slowly until it becomes disengaged from the thread. A
pin prevents the liquid from running.
Pull out the plug (pin) in one quick motion. The liquid will start to
drain.
Any residue can be drained by tilting the circulator slightly.
Hot liquid should not be drained. When certain conditions make drain-
ing necessary, please be safety conscious: wear protective clothing
and protective gloves.
2
Reset
23