REPLACEMENT PARTS AND ACCESSORIES
Rotor assembly
Pump Head Number
Order No.
Pump Head Number
Order No.
77200-50
77200-58
77200-52
77200-59
77202-50
77200-58
77200-52
77200-59
77200-60
77200-68
77200-62
77200-69
77202-60
77200-68
77200-62
77200-69
77201-60
77200-68
77201-62
77200-69
77200-70
77200-78
77200-72
77200-79
77200-80
77200-88
77200-82
77200-89
Mounting hardware for L/S Easy-Load
II
Pump Heads
Set contains #8-32 screws, washers and wing nuts (in two-, three-, and four-head
hardware).
Number of heads
Stainless steel
to be mounted
order number
1
77200-01
2
77200-02
3
77200-03
4
77200-04
6
7
MAINTENANCE AND CLEANING
No lubrication is required for the L/S EASY-LOAD
II
Pump Head.
Use a mild detergent solution to clean the pump head.
Do not immerse nor use excessive fluid.
To disassemble pump head for cleaning — See REPLACING ROTOR instructions.
Repair is limited to the replacement of the rotor assembly. Contact dealer for
further repair information.
See REPLACEMENT PARTS AND ACCESSORIES for parts ordering information.
REPLACING ROTOR
1. Remove pump head from drive.
2. Remove rear cover of pump head.
Figure #6. Replacing Rotor
3. Remove the two screws shown in
Figure #6.
4. Remove rotor assembly.
5. Install new rotor assembly and secure with two screws.
6. Reinstall rear cover.
ASSEMBLY
SCREWS