B/T
®
RAPID-LOAD
®
Peristaltic Pumps and Drive Operating Manual 3-1
Cole-Parmer
Section 3
Operation
A) DOWN ARROW (DECREMENT)
—Decrease value of a flashing display.
B) UP ARROW (INCREMENT)
—Increase value of a flashing display.
C) DISPENSE/COPY
—Set dispense volume, copy amount, or dispense time.
D) FLOW CONTROL
—Set flow rate for selected tubing size. To change flow rate, press
▲
or
▼
arrows. (If pump is running, its speed will change with new settings.)
E) CAL CONTROL
—Refine built-in calibration, using a measured volume.
F) STOP/START
—Stop/Start motor.
G) PRIME
—Run pump at full speed to fill or clear lines.
H) DIRECTION
—To change motor direction.
I) MODE SELECT
—INT for internal control; mA for remote current control; V for remote voltage
control.
J) SIZE
—Select tubing size and flow units, also displays maximum flow rate.
K) GALLONS
—Flow and Volume units indicator.
L) LITERS
—Flow and volume units indicator.
Figure 3-1.
Control Panel
Press buttons to activate function.
Use up/down (
▲
,
▼
) arrows to correct/change a flashing display.
Press STOP/START to enter new values.
Control
Display Functions
Models 77111-10
77111-15
77111-40
77111-47
A
B
C
D
E
F
G
H
I
J
K
L
