32
33
Password
The following screens describe how to lock the screen so that the blaster settings cannot be
changed.
1.
From the settings screen, select “E” using the rotary encoder dial to access the screen lock
screen.
2.
Using the rotary encoder dial, select the top blank line of the password entry screen and
press the dial once.
3.
Select a number and press the dial again to enter the selected number.
4.
Repeat until three numbers have been populated.
5.
Dial to the bottom “save icon” and press the rotary encoder dial to save the password.
6.
Repeat steps 1-4 to activate the screen lock.
7.
The green “lock icon” in the upper left corner will change to red.
8.
If the screen has been locked, repeat steps 1-4 with existing password and the screen will
unlock.
Recipes
The following screens describe the recipe functions for the PCS 60. Recipes are useful for saving
optimal settings for the machine for different types of surfaces. This saves time when switching from
one type of surface to another. Below describes how to save recipes and how to recall for use.
Figure 10: Recipe Screen
1. To access the Recipe screen:
a.
From the Home screen, use the rotary encoder dial to select settings then recipes.
2. To select a recipe:
a.
Using the rotary encoder dial, navigate to the Recipe Menu (A).
b. Rotate the dial left or right to scroll through recipes 1-9 (B).
c. Press the dial to select the desired recipe.
3. To create a recipe:
a.
Using the rotary encoder dial, navigate to and adjust the Blast Pressure (C), Particle
Size (D), and Feed Rate (E).
b. Once settings are adjusted, navigate to numbered recipe (B) and press to save.
4.
Using the rotary encoder dial, navigate to the home icon (F) and press to return to the Home
screen.
Summary of Contents for AERO 2 PCS 60
