manualshive.com logo in svg

Colby Instruments PDL-100A, Operating And Programming Manual

Share
Download
Colby Instruments PDL-100A Operating And Programming Manual Download Page 4

 

© 2010 Colby Instruments.  PDL-100A Operating and Programming Manual. 

Hardware Version 1.0 REV 1.0.  Firmware Version 1.70.

 

Certification and Warranty 

 

CERTIFICATION 

 

Colby Instruments certifies that the PDL-100A Series of Programmable Delay Line 
Instruments meets all published specifications at the time the instruments are shipped 
from the manufacturer.  

SPECIFICATIONS ARE SUBJECT TO CHANGE 

WITHOUT NOTIFICATION. 

 

WARRANTY 

 
The product is warranted against defects in material and workmanship for a period of one 
year from date of shipment. During the warranty period, Colby Instruments will at its 
option, either repair or replace the product or item which proves to be defective.  
Replacement products may be either new or like-new. 

 

EXCESSIVE WEAR OF CONNECTORS, THE TROMBONE UNIT, THE 
COAXIAL RELAYS, AND OTHER RELAYS CARRYING THE SIGNAL, ARE 
NOT COVERED BY THE WARRANTY.  THE FOREGOING WARRANTY 
SHALL NOT 

APPLY 

TO DEFECTS RESULTING FROM IMPROPER CARE 

OR USE OF THE INSTRUMENT BY THE BUYER.  THIS SHALL APPLY TO 
ALL COMPONENTS DELIVERED TO THE BUYER. 

 
For warranty service or repair, this product must be returned to Colby Instruments.  The 
Buyer shall prepay all shipping charges for the shipment of item to Colby Instruments.  
Colby Instruments shall pay the shipping charges to return the product to the Buyer. 
However, the Buyer shall be responsible for ALL shipping charges, duties and taxes for 
product returned to Colby Instruments from outside the United States of America.  

BUYER MUST OBTAIN A RETURN MATERIAL AUTHORIZATION NUMBER 
(RMA #) FROM COLBY INSTRUMENTS PRIOR TO THE SHIPMENT OF ANY 
ITEM TO COLBY INSTRUMENTS.  SHIP TO:  

 

Colby Instruments 

Attn: RMA # ________ 

1715 114

th

 Avenue SE 

Woodridge Building – Suite 112 

Bellevue, Washington 98004 

USA 

 
No other warranty is expressed or implied. Colby Instruments specifically disclaims the 
implied warranties or merchantability and fitness for a particular purpose. The remedies 
provided herein are the Buyer's sole and exclusive remedies. Colby Instruments shall not 
be liable for any direct or special, incidental or consequential damages, whether based on 
contract, tort, or any other legal theory. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PDL-100A











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands