DOMUSFIRE C29 - C35
23
4.6.1 Menu 01 – Chrono setting
Allows all chronothermostat functions to be enabled/disabled;
select ON to activate the function and display the
relevant segment/LED [ D ]
When Daily, Weekly or
Week End programming is entered, the
appropriate segment/LED [ C ] appears in the top right of the display.
Regarding selections and entering times,
use the buttons according to the table in par. 4.2.
By accessing the submenu:
DAY PROGRAM,
the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation stages delimited by the
times set according to the following table where the setting
OFF tells the clock to ignore the command.
selection
meaning
possible values
START1
activation time
time - OFF
STOP1
deactivation time
time - OFF
START2
activation time
time - OFF
STOP2
deactivation time
time - OFF
By accessing the submenu:
WEEK PROGRAM
it is possible to
enable/disable and set the weekly chronothermostat functions.
The weekly programmer has 4 independent programs whose final
effect consists of a combination of the
4 programmings.
The weekly programmer can be activated or deactivated;
also, by setting OFF in the time field, the clock ignores the
corresponding command.
Carry out programming making sure not to overlap the
hours of activation and/or deactivation on the same day
in different programs.
By accessing the submenu:
WEEK-END PROGRAM
it is
possible to enable/disable and set the week-end (Saturday -
Sunday) chronothermostat functions.
Activate WEEK-END programming only
after deactivating the weekly programming.
To avoid unwanted startup and shutdown operations, only
activate one program at a time.
Deactivate the daily program if the weekly program is
required; with this setting it is advisable to deactivate the
week-end program.
Menu level
Dialogue box
Input
Input
Menu level
Dialogue box
C
A
D
