Coitech 18-3235, Original Instructions Manual

Page: 9 / 32

9
EN
G
LI
S
H
Care and maintenance
• Always keep the motor’s ventilation openings free of dust and debris.
• Clean the machine as needed using a lightly moistened cloth and
mild detergent if necessary.
• Avoid using solvents and abrasive cleaning agents.
Troubleshooting guide
Problem Possible cause Possible solution
The machine
does not start. No power.
Short circuit.
Faulty power switch.
Check to see if there is power at
the wall socket.
Contact our Customer Service Dept
in case of motor or electrical faults.
Contact our Customer Service Dept
in case of motor or electrical faults.
The machine
runs slowly. Worn/damaged accessory.
Speed too low.
The motor is overheated. Sharpen or change the tool.
Alter the variable setting.
Do not press down too hard.
Strange noise. Mechanical fault.
Faulty windings. Contact our Customer Services.
Contact our Customer Services.
Heavy vibration. Loose accessory. Tighten the tool and make sure it is
set correctly.
Sparks in
the motor. Winding short circuited.
Dirty commutator. Contact our Customer Services.
Contact our Customer Services.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications
Power supply 230 V AC, 50 Hz
Power 180 W
No-load speed
8 000–33 000
Collet size 2.4 and 3.2 mm
Sound pressure (LpA) 76 dB(A) K 3 dB(A)
Sound power (Lwa) 87 dB(A) K 3 dB(A)
Vibration value 2.76 m/s² K 1.5 m/s²