- 29 -
4.6 Assigning the New Camera IP Address
No two devices on a single Ethernet network can have the same IP address. Use the following steps to
change a camera IP address before a second camera is added to the subnet.
1. Set your computer IP address to the same subnet as the camera IP address: Setup Panel> Network >
Network Setting.
Important: In order to make changes in camera configuration the user must be logged in as Admin-
istrator.
2. Change the camera address. The camera address can be changed manually or through a Dynamic
Host Configuration Protocol (DHCP) server.
Important: Care must be taken when modifying parameters on this page as the changes can make
the camera inaccessible through the network. Consult with your network administrator before start-
ing to assign new network settings to ensure that your camera won’t conflict with other devices.
3. Write down the new camera address to make the camera easy to find later. If the camera IP address
becomes lost, use the RISE Camera Discovery Tool to find the camera on a network. The software is
available as a free download at
http://www.cohuhd.com/Support/Software-Downloads
. Under RISE
Camera Discovery Tool, click “Download Now”.
