6.1. Placing the Headset
Finally, verify that the Quick-20 is properly positioned on the subject
’
s head.
The Fp1 and Fp2 sensor pods should rest above the subject
’
s eyebrows.
The crown should be sitting on the top of the subject
’
s head and the
earcups should rest securely around the subject
’
s ears. Ensure that the
Quick-20 is not tilted too far towards the back of the head.
Check again to
see that all of the legs and pods are not tilted or misaligned before
proceeding to the next steps. Ask the subject for any areas of discomfort
and re-position the sensors to lay flat on the head, if necessary.
27
