Battery
Value
Process
50-25%
As long as the total battery capacity of the MX-1502 reader's own
battery is higher than this value, the phone's own battery is kept at
100%. If the reader's own battery capacity drops below 1500 mAh,
the phone battery's capacity will not be kept at 100%, but it will be
charged to a certain level.
16-8%
If the capacity of the MX-1502 reader's own battery drops below this
threshold, the phone's own battery will not be charged.
20%
This value means a low charging level of the phone's own battery.
10%
(hystheresis)
When the phone's own battery drops below 20%, it will be charged to
30%.
Note
: Using or storing the device outside of the recommended temperature ranges may damage or reduce the
battery’s lifespan. Leaving the MX Series Mobile Terminal with a mobile device in direct sunlight for an extended
amount of time can raise the temperature above the recommended limit.
The following general rules apply to battery management:
l
If the device is equipped with a grip accessory battery, it will always be discharged first before switching to the
main battery.
l
While the grip battery is used, it takes over the role of the main battery.
l
If all batteries are discharged, the device enters power off mode.
19
MX-1502 Battery Management
