Compliance Statements
The MX-1502 has Regulatory Model R00045 (inductive) and Regulatory Model R00079 (non-inductive), and meets or
exceeds the requirements of all applicable standards organizations for safe operation. However, as with any electrical
equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow.
Please read these guidelines carefully before using your device.
The following specifications apply to the MX-1502 readers:
Regulator
Specification
USA
FCC Part 15, Subpart B Class A
Canada
ICES-003, Class A
European Community
EN55032, Class A
EN55024
Note
: For the most current CE declaration and regulatory conformity information, see the Cognex support site:
Safety and Regulatory
European
Compliance
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This equipment complies with the essential requirements of EU Directive 2014/30/EU.
Declarations are available from your local representative.
FCC Class A
Compliance
Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Canadian
Compliance
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe A est conforme à la norme NMB-003 du Canada.
UL and cUL
Statement
UL 60950-1, CAN/CSA C22.2 No. 60950-1-07, IEC 60950
Korea
MX-1502: Regulatory Model R00045 (inductive), R00079 (non-inductive): R-REM-CGX-R00045
Japanese
Statement
For European Union Users
Cognex complies with Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012
on waste electrical and electronic equipment (WEEE).
This product has required the extraction and use of natural resources for its production. It may contain hazardous
substances that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural
resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or
recycle most of the materials of the product you are disposing in a sound way.
22
Compliance Statements