Cognex In-Sight 7600, Reference Manual

Page: 24 / 113

Connectors and Indicators
Connector Function
PWR
Connector
Connects the Breakout cable, which provides connections to an external power supply, the acquisition
trigger input, general-purpose inputs, high-speed outputs and RS-232 serial communications. For
more information, refer to
Breakout Cable on page 93 . Alternately, this connector is used to attach the
I/O Module cable to a compatible In-Sight I/O module, which adds general-purpose discrete I/O. For
more information, refer to
I/O Module Cable on page 94 .
LIGHT
Connector
Connects the vision system to an external lighting device. For more information, refer to External Light
Connector on page 91 .
ENET
Connector
Connects the Ethernet cable, which provides 10/100/1000 Ethernet connectivity. For more information,
refer to
Ethernet Cable on page 92 .
Indicator Function
Focus Metric LEDs
Indicates the image focus score (0 - 10) while in Live Video Mode within In-Sight
Explorer.
TRIG Button
Manually triggers an image acquisition when the vision system is either:
l
Online within In-Sight Explorer and the acquisition Trigger parameter is set
to Manual.
l
Offline within In-Sight Explorer.
Power LED The green LED illuminates to indicate that the vision system is powered on.
SD Card Status
LED
l
Off: The SD card is not inserted.
l
Green: The SD card is present, and it is safe to remove the SD card after
removing power from the vision system.
l
Yellow: The SD card is present, but it is not safe to remove it.
Pass/Fail LED and
Indicator Ring Green or red when active. User configurable.
Network LED The yellow LED flashes to indicate network activity.
Error LED Red when active. User configurable.
TUNE Button
Used as an Event Trigger within In-Sight Explorer to force a cell containing an
Event structure to run when the TUNE button is pressed.
24
Introduction